Search This Blog

Sunday, February 8, 2009

How to Make a Light Bulb Vaporizer

Avove: Whip and cap for light bulb vaporizer (aka Bright Idea II)

You've heard of them I'm sure, and no doubt you have lusted for one as well. Their vaporizers, the latest and greatest in pot smoking technology. The best part is, you don't actually "smoke" the green when you use one. Instead, they vaporize at low temperature, the active ingredient in weed, delta 9 tetrahydrocannabinol (you know, THC, the part that gets you high). This is a pretty sweet deal because vaporizing is 30% more efficient than smoking, and on top of that they are don't pollute your lungs with havoc reeking carbon chains. So not only do you use less bud, you use less of your lungs to get high!

That is pretty much all old news though. If you haven't heard of vaporizing yet, you have either just started smoking, or you're still living in the stone age (stoned age I suppose). If you have heard of vaporizers, than I'm sure you have also heard that they're fairly expensive, and you've heard right. They are, the ever popular Volcano costs in excess of $500. That's no small chunk of change if you're a typically broke stoner like myself. What do you do then to enjoy the benefits of vaporizers without all the cost?

What if I told you that there is probably a vaporizer sitting very near by, just waiting to be used. Yes, there is some assembly required, but odds are, all the parst and tools that you need are within arms reach. Thats pretty cool right? You might not even have to get out of your seat (although it might not hurt you hippy couch potatoe).

Here is what you need:
  1. A light bulb (just a regular old incadecent bulb, the higher wattage the better though)
  2. A cap from a 20 oz soda bottle
  3. A straw
  4. Salt
  5. A pair of scissors
Optional
  • A pair of needle nose pliers
Go ahead and take five minutes to gather these items. If you're having trouble finding everything, don't be afraid (or too lazy) to check under those stacks of High Times and 420 Magazines. Got everything? Good...

How to build a Lightbulb Vaporrizer

It may be helpful to refere to this diagram as you work:





1. Outline of Glass bulb
2. Low pressure inert gas (argon, neon, nitrogen)
3. Tungsten filament
4. Contact wire (goes out of stem)
5. Contact wire (goes into stem)
6. Support wires
7. Stem (glass mount)
8. Contact wire (goes out of stem)
9. Cap (sleeve)
10. Insulation (vitrite)
11. Electrical contact





Step 1:

Take your scissors in your lead hand, and the light bulb in the other. Use the scissors to peel up the electrical contact on the socket end of the light bulb. Once its free, pull it out along with any wires that come with it.

Step 2:
Removing the electrical contact should have revealed a small hole in the peice of dark glass at the socket end of the bulb. Use your scissors (or pliers) to carefully break and remove this piece of glass. Remove as much as you can, preferably so that non of if it pokes up past the metal socket.

Step 3:
Using your scissors, pliers, or a screwdriver, carefully (and I do mean carefully) push down on the stem (what the filament is mounted to) through the socket cap until it breaks out from the inside of the bulb. After that, you'll want to clean up the edges of the stem and break those out as well until only bulb remains. Once you've done all the breaking that needs to be done empty the broken glass and filament into a garbage can.

Step 4:
Now grab the salt and pour it through the cap into the bulb. Use say, 2 or 3 tablespoons of salt. Cover the hole in the socket cap and shake viggorously (but carefully so the bulb doesn't fly from your hand). The salt will strip away the white powder coat on the inside of the bulb. Repeat this process until all traces of the powder coat are gone. I couldn't tell you what that stuff is, but I can tell you that you do not want ot smoke it, it won't get you high. One its all gone, go ahead and rinse all of the salt out of the bulb. Rinse it well, otherwise the salt will etch into the glass when it dries.

Step 5:
Take the soda bottle cap that you were supposed to grab, if you already forgot about that, go get one. Useing your scissors poke a hole into the center of the cap and bore it out until the hole is large enough to insert your straw. Don't make your hole to big, you wan the straw to stay in place. Once you have your straw hole, poke another small hole off-center for airflow. Insert your straw into the cap. Gently screw the soda cap onto the socket cap of the light bulb and you're done!

Congrats! Now you too can enjoy the benefits of vaporizing for less than a trip to Taco Bell. To use it, just break up your weed like you would for rolling a joint or loading a bowl, and place about a small bowl's worth into the bulb. Replace the soda cap and get read to be very stoned. Now go ahead and light your lighter. Hold it about one to two centimeters below the bulb, directly underneath the weed. Wait until you see some white vapors start to pour out of the bud. Once this happens, let a decent amount of vapor build up, shake the bulb to release more. Now just take a hit through the straw and hold it in...

Aahhhh, thats the stuff ain't it?

Eventually you'll want to buy a real vapo, but this works in a pinch, especially when cash is tight and you need to conserve your precious, expensive, and difficult to acquire marijuana.


18 comments:

  1. these are so awesome...I just finished making one..and I am SOOOOOO high...!!!

    ReplyDelete
    Replies
    1. This is really amazing to know that we can make a vaporizer just from a light bulb. I am using now digital vaporizers but for sure i am gonna make this. Thanks for this.

      Delete
  2. I know with real vaporizers you can get the weed and smoke it again. Is there any way to get the weed back out once you're done? Just scraping at it?

    Also, how many times can this be used?

    Thanks! I made one and am currently waiting for it to dry.

    ReplyDelete
  3. Does the insulation in the metal cap do any harm or is it safe to leave in there? Do you know of a good way to remove it?

    ReplyDelete
  4. Nice concept.

    Why is a higher wattage bulb better?

    If you have a clear bulb to start with you can skip the whole salt step right?

    ReplyDelete
  5. Higher wattage bulbs are made with thicker glass, so they'll be a bit sturdier. You can skip the salt step with a clear bulb, but I would still rinse it and heat it up to make sure no residues are present before using.

    ReplyDelete
  6. This comment has been removed by a blog administrator.

    ReplyDelete
  7. Really detailed and pretty good advices on how to make a light bulb vaporizer.Appreciate it and great job

    ReplyDelete
  8. i just recently discovered this website but oh my god you seem like a genious

    ReplyDelete
  9. I have a friend who used a frosted glass light bulb vaporizer and is now suffering some serious side affects. He had cleaned it out properly with salt, water and alcohol. Apparently there was some toxic fumes that were inhaled.

    He is now experiencing shortness of breath, spells of dizziness and sickness, and his lung feels "covered in something".

    Unfortunately, he lives in UK where they have universal health care coverage and met with 3 doctors who said he is fine after listening to his chest, and yet he feels that they were just trying to scoot him out the door as soon as possible. One doctor made the bizarre move of prescribing anti-depressants to lift his mood and also suggested that he using anti-acids to help alleviate the symptoms. He is going to see a specialist but it is a long and painful wait.

    Has anyone had similar experiences? If so, how was it treated and what can he expect?

    ReplyDelete
  10. Wow interesting concept, never tried that before. Thanks for the info!

    ReplyDelete
  11. Eeekkkkk just made mine trying it tonight

    ReplyDelete
  12. you do know that is the same way to make a meth pipe

    ReplyDelete
  13. Quite interesting and different post.. Keep posting..Stay blessed!!
    Ez pen

    ReplyDelete
  14. How to use a medical marjuana vaporizer?
    vaper tech

    ReplyDelete
  15. I am really very agree with your qualities it is very helpful for look like home. Thanks so much for info and keep it up.
    Head shop hollywood

    ReplyDelete

What say you?

P.S. I know that the word verification is annoying, but sometimes its for a good cause. You may be assisting in translating a book from typeface to digital. So save a tree and give it a go.